PTFE Powder is an additive that can be used in compounding, to promote superior properties including low friction, low adhesion, and flame-heat-chemical-weather resistance. Our PTFE’s can be compounded in plastics, inks, and oils, and are able to easily blend with high heat and high performance polymers such as PEK, PEEK, PEN, LCP, PES as well as general commodity and engineering type polymers such as PP/PE and ABS, PC and POM. Our PTFE powders performance is considered to be at the top of the industry, especially for high heat material compounding, in PEEK, PEN and LCP resins.
KT-Series High Molecular Weight
Feature |
Manufacturer |
Grade |
Characteristics |
Typical Uses |
Data Sheets
|
Specifications |
MSDS |
KT-Series High Molecular Weight |
Kitamura |
KT-300M |
Fine powder of completely sintered high molecular weight PTFE, with mean particle size of 40μm |
High heat resistance, up to 450°C, for use in LCP, PEEK, PEN, PA, POM, PC, PP, PE, ABS, Epoxy, Phenol and others |
|
|
KT-Series High Molecular Weight |
Kitamura |
KT-400M |
Fine powder of completely sintered high molecular weight PTFE, with mean particle size of 33μm |
High heat resistance, up to 450°C, for use in LCP, PEEK, PEN, PA, POM, PC, PP, PE, ABS, Epoxy, Phenol and others |
|
|
KT-Series High Molecular Weight |
Kitamura |
KT-600M |
Fine powder of completely sintered high molecular weight PTFE, with mean particle size of 14μm |
High heat resistance, up to 450°C, for use in LCP, PEEK, PEN, PA and others |
|
|
KTL-Series PTFE
Feature |
Manufacturer |
Grade |
Characteristics |
Typical Uses |
Data Sheets
|
Specifications |
MSDS |
KTL-Series PTFE |
Kitamura |
KTL-450 |
Fine powder of completely sintered PTFE, with mean particle size of 19μm |
High heat resistance, up to 410°C, for use in PPS, PI, PAI, PEI, PSU, PA, PC, Rubbers, Elastomers, and others |
|
|
KTL-Series PTFE |
Kitamura |
KTL-620 |
Fine powder of completely sintered PTFE, with mean particle size of 11.5μm |
High heat resistance, up to 410°C, for use in PPS, LCP, PI, PAI, PEI, PSU, PA, PC and others |
|
|
KTL-Series PTFE |
Kitamura |
KTL-610 |
Fine powder of completely sintered PTFE, with mean particle size of 12.0μm |
High heat resistance, up to 370°C, for use in PPS, PI, PAI, PEI, PSU, PA, PC and others |
|
|
KTL-Series Low Molecular Weight
Feature |
Manufacturer |
Grade |
Characteristics |
Typical Uses |
Data Sheets
|
Specifications |
MSDS |
KTL-Series Low Molecular Weight |
Kitamura |
KTL-8N |
Fine powder of completely sintered low molecular weight PTFE, with mean particle size of 4.3μm |
Heat resistant up to 250°C, for use in PP, PE, PBT, ABS, Elastomers, Epoxy and others |
|
|
KTL-Series Low Molecular Weight |
Kitamura |
KTL-4N |
Fine powder of completely sintered low molecular weight PTFE, with mean particle size of 3.5μm |
Heat resistant up to 250°C, for use in PP, PE, PBT, ABS, Elastomers, Epoxy and others |
|
|
KTL-Series Low Molecular Weight |
Kitamura |
KTL-2N |
Fine powder of completely sintered low molecular weight PTFE, with mean particle size of 3.0μm |
Heat resistant up to 250°C, for use in PP, PE, PBT, ABS, Elastomers, Epoxy and others |
|
|
Coagulated Powder PTFE
Feature |
Manufacturer |
Grade |
Characteristics |
Typical Uses |
Data Sheets
|
Specifications |
MSDS |
Coagulated Powder PTFE |
Kitamura |
KTL-8F |
Coagulated powder of unsintered low molecular weight PTFE, with mean particle size of 3.5μm |
Heat resistant up to 250°C, for use in Thermoplastic Elastomers and others |
|
|
Coagulated Powder PTFE |
Kitamura |
KTL-500F |
Fine powder, dispersed close to the state where very fine particles have coagulated |
Heat resistant up to 400°C, for use in Paints, Grease, Coatings, Thermoplastic Elastomers and others |
|
|
*The data presented here are typical values only and may or may not be based upon actual measurements. Technical information contained herein is furnished without charge or obligation, and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, we make no representation about, and is not responsible or liable for the accuracy or reliability of data, nor for the toxicological effects or Industrial Hygiene requirements associated with particular uses of any product described herein. Any properties listed are provided as information only and in no way modify, amend, enlarge, or create any specification or warranty.